Deployment and early experience with remote-presence patient care in a community hospital

Department of Surgery, University of Kansas School of Medicine, Kansas City, Kansas, USA.
Surgical Endoscopy (Impact Factor: 3.26). 02/2007; 21(1):53-6. DOI: 10.1007/s00464-005-0261-z
Source: PubMed


The introduction of the RP6 (InTouch Health, Santa Barbara, CA, USA) remote-presence "robot" appears to offer a useful telemedicine device. The authors describe the deployment and early experience with the RP6 in a community hospital and provided a live demonstration of the system on April 16, 2005 during the Emerging Technologies Session of the 2005 SAGES Meeting in Fort Lauderdale, Florida.
The RP6 is a 5-ft 4-in. tall, 215-pound robot that can be remotely controlled from an appropriately configured computer located anywhere on the Internet (i.e., on this planet). The system is composed of a control station (a computer at the central station), a mechanical robot, a wireless network (at the remote facility: the hospital), and a high-speed Internet connection at both the remote (hospital) and central locations. The robot itself houses a rechargeable power supply. Its hardware and software allows communication over the Internet with the central station, interpretation of commands from the central station, and conversion of the commands into mechanical and nonmechanical actions at the remote location, which are communicated back to the central station over the Internet. The RP6 system allows the central party (e.g., physician) to control the movements of the robot itself, see and hear at the remote location (hospital), and be seen and heard at the remote location (hospital) while not physically there.
Deployment of the RP6 system at the hospital was accomplished in less than a day. The wireless network at the institution was already in place. The control station setup time ranged from 1 to 4 h and was dependent primarily on the quality of the Internet connection (bandwidth) at the remote locations. Patients who visited with the RP6 on their discharge day could be discharged more than 4 h earlier than with conventional visits, thereby freeing up hospital beds on a busy med-surg floor. Patient visits during "off hours" (nights and weekends) were three times more efficient than conventional visits during these times (20 min per visit vs 40-min round trip travel + 20-min visit). Patients and nursing personnel both expressed tremendous satisfaction with the remote-presence interaction.
The authors' early experience suggests a significant benefit to patients, hospitals, and physicians with the use of RP6. The implications for future development are enormous.

Download full-text


Available from: Joe Petelin,
  • Source
    • "Previous studies have revealed a number of ways to provide service from distant locations. Telephone and video conferencing are widespread, and recently telepresence robots have also come into use [18] [19]. Studies have begun to investigate support techniques for telepresence robots [20]. "
    [Show abstract] [Hide abstract]
    ABSTRACT: The development of humanlike service robots which interact socially raises a new question: How can we make good interaction content for such robots? Domain experts specializing in the target service have the knowledge for making such content. Yet, while they can easily engage in good face-to-face interactions, we found it difficult for them to prepare conversational content for a robot in written form. Instead, we propose involving experts as teleoperators in an iterative development process in which the expert develops content, teleoperates a robot using that content, and then revises the content based on that interaction. We propose a software system and design guidelines to enable such an iterative design process. To validate these solutions, we conducted a comparison experiment in the field, with elderly volunteer guides teleoperating a robot at a tourist information center in Nara, Japan. The results showed that our system and guidelines enabled domain experts with no robotics background to create better interaction content and conduct better interactions than domain experts without our system.
    RO-MAN, 2013 IEEE; 01/2013
  • Source
    • "Telemedicine refers to the use of telecommunications technologies in healthcare delivery that allows physicians to provide medical information and services when distance separates the participants[5] [6]. Telemedicine has great potential in increasing rural population's access to health care, particularly in developing countries[6], since with the use of information technology to deliver health care services and information from one location to another, geographically separated location become easy and effective[7] [8]. Telemedicine solves the contradiction between the increasing demands for healthcare and limited hospital resources, and allows patients to be monitored remotely during normal daily life, which will enhance the quality of healthcare services[9]. "

    12/2012; 1(1):22-31. DOI:10.5923/j.ajis.20110101.04
  • Source
    • "Recently wireless pulse-oximetry and wireless electrode appears as telemetry using the wireless instead of the wired [12] [13]. Robot is used for remotepresence and remote surgical training through wireless LAN[14] [15]. "
    [Show abstract] [Hide abstract]
    ABSTRACT: Wireless network based u-Health services enable people's health care anytime, anywhere. Recently technology advance in the area of sensing, networking, processing is developed rapidly. This advance of information technology is raising the change of traditional healthcare system. By using wireless and mobile networks, patients could be monitored and managed outside hospitals and also examined with safety and efficiency in hospitals. Even though there are lots of services for u-Health including commercial services, to envision and make u-Health become more active in the future, safety and usefulness of u-Health in the perspective of medicine should be needed.
    Communications and Information Technology, 2009. ISCIT 2009. 9th International Symposium on; 10/2009
Show more