Article

Hierarchies, multiple energy barriers, and robustness govern the fracture mechanics of α-helical and β-sheet protein domains. PNAS, 104(42), 16410-16415

Laboratory for Atomistic and Molecular Mechanics, Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139, USA.
Proceedings of the National Academy of Sciences (Impact Factor: 9.81). 11/2007; 104(42):16410-5. DOI: 10.1073/pnas.0705759104
Source: PubMed

ABSTRACT The fundamental fracture mechanisms of biological protein materials remain largely unknown, in part, because of a lack of understanding of how individual protein building blocks respond to mechanical load. For instance, it remains controversial whether the free energy landscape of the unfolding behavior of proteins consists of multiple, discrete transition states or the location of the transition state changes continuously with the pulling velocity. This lack in understanding has thus far prevented us from developing predictive strength models of protein materials. Here, we report direct atomistic simulation that over four orders of magnitude in time scales of the unfolding behavior of alpha-helical (AH) and beta-sheet (BS) domains, the key building blocks of hair, hoof, and wool as well as spider silk, amyloids, and titin. We find that two discrete transition states corresponding to two fracture mechanisms exist. Whereas the unfolding mechanism at fast pulling rates is sequential rupture of individual hydrogen bonds (HBs), unfolding at slow pulling rates proceeds by simultaneous rupture of several HBs. We derive the hierarchical Bell model, a theory that explicitly considers the hierarchical architecture of proteins, providing a rigorous structure-property relationship. We exemplify our model in a study of AHs, and show that 3-4 parallel HBs per turn are favorable in light of the protein's mechanical and thermodynamical stability, in agreement with experimental findings that AHs feature 3.6 HBs per turn. Our results provide evidence that the molecular structure of AHs maximizes its robustness at minimal use of building materials.

Download full-text

Full-text

Available from: Sinan Keten, Jun 17, 2014
1 Follower
 · 
111 Views
 · 
25 Downloads
  • Source
    • "D. Li & B. Ji laser optical tweezer (LOT) and magnetic tweezer (MT) are among the most prominent experimental tools in DFS [Evans, 2001; Hugel and Seitz, 2001; Kumar and Li, 2010]. On the other side, steered molecular dynamics (steered-MD) simulations have often been used to mimic the DFS experiments for studying the ligand–receptor interactions [Colizzi et al., 2010; Li et al., 2011; Li and Ji, 2012], protein unfolding [Ackbarow et al., 2007; Sotomayor and Schulten, 2007; Wang and Chen, 2009; Ruiz and Keten, 2011; Cheng et al., 2014; Xu et al., 2014] and antigen–antibody recognition in protein–protein complex [Cuendet and Michielin, 2008]. However, there are still many challenging problems and debates on how to correctly analyze and understand the data measured by DSF experiments as well as by MD simulations at different loading rates. "
    [Show abstract] [Hide abstract]
    ABSTRACT: Single-molecule dynamic force spectroscopy (DFS) is a powerful tool for studying mechanical forces of molecular interactions. Recently, the important role of bond rebinding in DSF experiments was recognized, which intrigued mounting researches in this direction. In this work, we study how the bond rebinding influences the strength of single-molecular bonds using Brownian dynamics (BD) simulations and theoretical modeling. Our results show that bond rebinding significantly enhances the strength of single-molecular bond at ultralow loading rates. The rebinding behavior strongly depends on the loading stiffness, suggesting that the strength of single-molecular bond is not only dependent on its intrinsic property, but also the stiffness of loading device. By connecting our new model with conventional theories that did not consider the rebinding effect and are only applied to high loading rates, we propose a unified scheme to predict the rupture forces in a full range of loading rate in DSF experiments and simulations.
    International Journal of Applied Mechanics 02/2015; 7(1):1550015. DOI:10.1142/S1758825115400153 · 1.29 Impact Factor
  • Source
    • "Therefore, the first goal of this paper is to quantify the bending rigidity and persistence length of CPNs using fully atomistic molecular dynamics simulations and validating these findings by transmission electron microscope (TEM) experiments. Fragmentation and failure kinetics on single molecules under a mechanical force has been previously studied, primarily for biological proteins and DNA [39] [40] [41] [42] [43] [44]. However, the deformational behavior of these systems, mainly governed by entropic contributions to the free energy [45] [46], greatly differ from those of supramolecular assemblies of CPs composed of small, fairly rigid, building blocks stabilized by hydrogen bonds, giving rise to enthalpic elasticity and largely brittle behavior that is relatively less understood [21]. "
    [Show abstract] [Hide abstract]
    ABSTRACT: Cyclic peptide nanotubes (CPNs) exhibit impressive structural, mechanical and chemical properties in resemblance to beta-sheet proteins found in silks and amyloids, and show potential as supramolecular nanotubes that can be utilized to generate novel nanocomposites and nanoporous thin films. Quantifying the persistence length and thermomechanical fragmentation of CPNs is of great importance for establishing a theoretical basis of how to generate rectilinear nanostructures with controlled aspect ratio and rigidity. However, factors governing the elasticity and dynamical breaking of these supramolecular nanostructures remain to be fully understood. Here we present a statistical analysis of the Young's modulus and persistence length of CPNs using fully-atomistic molecular dynamic simulations in explicit solvent. We show that the measured properties exhibit a dependence on the magnitude of the shear force applied, and extrapolation to the quasi-static deformation case yields 0.46 μm for the persistence length and 7.8 GPa for the Young's modulus, in agreement with our experimental observations from TEM images. We establish a theoretical model for the spatial and temporal distribution of stochastic fracture, which we use to explain the simulation-based observations of spontaneous fragmentation under an applied shear force. Our methodology, blending theory, simulation and experiments provide a framework that can be utilized to investigate the mechanical behavior of self-assembling protein materials, paving the way for their design towards biological and industrial applications.
    Nanotechnology 04/2013; 24(19):195103. DOI:10.1088/0957-4484/24/19/195103 · 3.67 Impact Factor
  • Source
    • "Employing CG models implies a high simplification of the all-atom description, thus making higher size and time scales accessible. If the essential physics of the interesting processes is captured, CG simulations results are useful to systematically study complex biological systems (Ackbarow et al., 2007; Arkhipov et al., 2006; Bahar and Rader, 2005; Bond et al., 2007; Chang et al., 2006; Chng and Yang, 2008; Chu and Voth, 2006, 2007; Deriu et al., 2010a, 2010b; Gautieri et al., 2009; Orsi et al., 2008; Qin et al., 2010; Tozzini, 2005; Xu et al., 2010). Nevertheless, in the case of F-actin, the phenomena at molecular scale, such as the surface interactions among actin monomers, should be considered explicitly. "
    [Show abstract] [Hide abstract]
    ABSTRACT: The actin microfilament (F-actin) is a structural and functional component of the cell cytoskeleton. Notwithstanding the primary role it plays for the mechanics of the cell, the mechanical behaviour of F-actin is still not totally explored. In particular, the relationship between the mechanics of F-actin and its molecular architecture is not completely understood. In this study, the mechanical properties of F-actin were related to the molecular topology of its building monomers (G-actin) by employing a computational multi-level approach. F-actins with lengths up to 500 nm were modelled and characterized, using a combination of equilibrium molecular dynamics (MD) simulations and normal mode analysis (NMA). MD simulations were performed to analyze the molecular rearrangements of G-actin in physiological conditions; NMA was applied to compute the macroscopic properties of F-actin from its vibrational modes of motion. Results from this multi-level approach showed that bending stiffness, bending modulus and persistence length are independent from the length of F-actin. On the contrary, the orientations and motions of selected groups of residues of G-actin play a primary role in determining the filament flexibility. In conclusion, this study (i) demonstrated that a combined computational approach of MD and NMA allows to investigate the biomechanics of F-actin taking into account the molecular topology of the filament (i.e., the molecular conformations of G-actin) and (ii) that this can be done using only crystallographic G-actin, without the need of introducing experimental parameters nor of reducing the number of residues.
    Journal of Biomechanics 02/2011; 44(4):630-6. DOI:10.1016/j.jbiomech.2010.11.014 · 2.75 Impact Factor
Show more