Article

Nominally stationary high-concentration solar optics by gradient-index lenses

Mechanical Engineering Department, Columbia University, 220 S.W. Mudd Building, 500 W 120th St, New York, NY 10027, USA.
Optics Express (Impact Factor: 3.53). 01/2011; 19(3):2325-34. DOI: 10.1364/OE.19.002325
Source: PubMed

ABSTRACT It is shown how novel solutions for realistic gradient-index lenses create the possibility of nominally stationary solar photovoltaic concentrators capable of daylong averaged flux concentration levels of order 10(3).

0 Followers
 · 
139 Views
  • [Show abstract] [Hide abstract]
    ABSTRACT: We introduce a novel optofluidic solar concentration system based on electrowetting tracking. With two immiscible fluids in a transparent cell, we can actively control the orientation of fluid–fluid interface via electrowetting. The naturally-formed meniscus between the two liquids can function as a dynamic optical prism for solar tracking and sunlight steering. An integrated optofluidic solar concentrator can be constructed from the liquid prism tracker in combination with a fixed and static optical condenser (Fresnel lens). Therefore, the liquid prisms can adaptively focus sunlight on a concentrating photovoltaic (CPV) cell sitting on the focus of the Fresnel lens as the sun moves. Because of the unique design, electrowetting tracking allows the concentrator to adaptively track both the daily and seasonal changes of the sun’s orbit (dual-axis tracking) without bulky, expensive and inefficient mechanical moving parts. This approach can potentially reduce capital costs for CPV and increases operational efficiency by eliminating the power consumption of mechanical tracking. Importantly, the elimination of bulky tracking hardware and quiet operation will allow extensive residential deployment of concentrated solar power. In comparison with traditional silicon-based photovoltaic (PV) solar cells, the electrowetting-based self-tracking technology will generate ∼70% more green energy with a 50% cost reduction.
    Solar Energy 03/2013; 89:152–161. DOI:10.1016/j.solener.2012.12.018 · 3.54 Impact Factor
  • [Show abstract] [Hide abstract]
    ABSTRACT: We present the design and simulation of first-ever planar single-element solar lenses (modified hemispherical gradientindex structures) for concentrator photovoltaic applications, with high collection efficiency and liberal optical tolerance at averaged cell irradiance levels exceeding 1000 suns. These compact lens designs satisfy the severe constraints of the refractive indices of viable polymeric materials and fabrication techniques, for visible and near-infrared radiation. The planar hemispherical gradient-index lens for a far-field (solar) source is created from a near-field unit magnification spherical gradient-index lens. Our new solutions incorporate a constant-index core (crucial for manufacturability). Simulations include a polychromatic and extended sun. A sample design for an f/1.40 solar lens is provided, where planar lenses comprise a concentrator module's protective glazing, with loss-less packing due to a square lens entry allowed by the modified truncated (non-full aperture) design, without incremental optical losses.
    Proceedings of SPIE - The International Society for Optical Engineering 10/2012; DOI:10.1117/12.928408 · 0.20 Impact Factor
  • [Show abstract] [Hide abstract]
    ABSTRACT: Optical concentrators that could be used as a flat panel type stationary photovoltaic (PV) system will enable significant reduction in the cost of PV power generation. This paper presents the analysis of a concentrator based on an optically transparent planar waveguide with a diffused reflector on the rear surface and PV devices placed at the edge of the waveguide. Optical collection efficiency of the stationary concentrator for geometric concentration ratios in the range 2–1000 has been analyzed. Despite reduction in optical collection efficiency of this concentrator design compared to traditional flat PV panel or tracking type concentrator panels, for practical operation in the geometric concentration ratio up to 40, a factor of 2–10 times reduction in cost of PV modules per unit power generated can be envisioned due to ease in manufacturing (including flexible roll-to-roll production) and significant savings in materials usage. Experimental data shows a strong dependence of the optical collection efficiency on surface roughness of the diffuser.
    Solar Energy Materials and Solar Cells 08/2012; 103:35–40. DOI:10.1016/j.solmat.2012.04.012 · 5.03 Impact Factor