Synthesis of Nanosheet Crystallites of Ruthenate with an α-NaFeO 2 -Related Structure and Its Electrochemical Supercapacitor Property

Collaborative Innovation Center for Nanotech Fiber, Shinshu University, 3-15-1 Tokida, Ueda, Nagano 386-8567, Japan.
Inorganic Chemistry (Impact Factor: 4.76). 05/2010; 49(10):4391-3. DOI: 10.1021/ic100176d
Source: PubMed


Unilamellar crystallites of conductive ruthenium oxide having a thickness of about 1 nm were obtained via elemental exfoliation of a protonic layered ruthenate, H(0.2)RuO(2).0.5H(2)O, with an alpha-NaFeO(2)-related crystal structure. The obtained RuO(2) nanosheets possessed a well-defined crystalline structure with a hexagonal symmetry, reflecting the crystal structure of the parent material. The restacked RuO(2) nanosheets exhibited a high pseudocapacitance of approximately 700 F g(-1) in an acidic electrolyte, which is almost double the value of the nonexfoliated layered protonated ruthenate.

20 Reads
  • [Show abstract] [Hide abstract]
    ABSTRACT: Ultrathin films composed of ruthenate nanosheets (RuO(2)ns) were fabricated via electrostatic self-assembly of unilamellar RuO(2)ns crystallites derived by total exfoliation of an ion-exchangeable layered ruthenate. Ultrathin films with submonolayer to monolayer RuO(2)ns coverage and multilayered RuO(2)ns thin films were prepared by controlled electrostatic self-assembly and layer-by-layer deposition using a cationic copolymer as the counterion. Electrical properties of a single RuO(2)ns crystallite were successfully measured by means of scanning probe microscopy. The sheet resistance of an isolated single RuO(2)ns crystallite was 12 kΩ sq(-1). Self-assembled submonolayer films behaved as a continuous conducting film for coverage above 70%, which was discussed based on a two-dimensional percolation model. Low sheet resistance was attained for multilayered films with values less than 1 kΩ sq(-1). Interestingly, the grain boundary resistance between nanosheets seems to contribute only slightly to the sheet resistance of self-assembled films.
    Langmuir 11/2010; 26(23):18049-54. DOI:10.1021/la103848f · 4.46 Impact Factor
  • [Show abstract] [Hide abstract]
    ABSTRACT: Porously assembled 2D nanosheets of alkali metal manganese oxides were synthesized via the flocculation of exfoliated MnO2 nanosheets with alkali metal cations. According to X-ray diffraction and electron microscopic analyses, the MnO2 nanosheets were porously restacked with alkali metal cations, resulting in the mesoporous assembly of lamellar crystallites with surface expansion (50−70 m2 g−1). Mn K-edge X-ray absorption spectroscopy clearly demonstrated that manganese ions in the reassembled materials were stabilized in octahedral symmetry with the mixed oxidation state of Mn3+/Mn4+. The present reassembled manganates showed large capacitances of 140−160 F g−1 and excellent cyclability of 93−99% up to the 1000th cycle. The electrochemical cycling did not induce notable frustration in the crystal structure of manganate nanosheets, underscoring the high structural stability of the reassembled manganates. This study provided strong evidence for the effectiveness of the exfoliation−reassembling method in enhancing the capacitance performance of layered metal oxides.
    The Journal of Physical Chemistry C 11/2010; 114(50). DOI:10.1021/jp108969s · 4.77 Impact Factor
  • [Show abstract] [Hide abstract]
    ABSTRACT: A wide variety of cation-exchangeable layered transition metal oxides and their relatively rare counterparts, anion-exchangeable layered hydroxides, have been exfoliated into individual host layers, i.e., nanosheets. Exfoliation is generally achieved via a high degree of swelling, typically driven either by intercalation of bulky organic ions (quaternary ammonium cations, propylammonium cations, etc.) for the layered oxides or by solvation with organic solvents (formamide, butanol, etc.) for the hydroxides. Ultimate two-dimensional (2D) anisotropy for the nanosheets, with thickness of around one nanometer versus lateral size ranging from submicrometer to several tens of micrometers, allows them to serve either as an ideal quantum system for fundamental study or as a basic building block for functional assembly. The charge-bearing inorganic macromolecule-like nanosheets can be assembled or organized through various solution-based processing techniques (e.g., flocculation, electrostatic sequential deposition, or the Langmuir-Blodgett method) to produce a range of nanocomposites, multilayer nanofilms, and core-shell nanoarchitectures, which have great potential for electronic, magnetic, optical, photochemical, and catalytic applications.
    Advanced Materials 12/2010; 22(45):5082-104. DOI:10.1002/adma.201001722 · 17.49 Impact Factor
Show more