Conference Paper

Benchmark systems for simulation of TCSC and SVC

Dept. of Electr. & Comput. Eng., Idaho Univ., Moscow, ID
DOI: 10.1109/PESW.2002.985047 Conference: Power Engineering Society Winter Meeting, 2002. IEEE, Volume: 1
Source: IEEE Xplore

ABSTRACT This paper presents modeling guidelines for producing benchmark models suitable for use in electromagnetic transients programs for two thyristor-controlled reactor (TCR) based compensators, the static VAr compensator (SVC) and the thyristor controlled series capacitor (TCSC). Basic modeling procedures for representing the power electronic circuit lower level controls, and outer level controls are presented.

1 Bookmark
 · 
88 Views
  • [Show abstract] [Hide abstract]
    ABSTRACT: The research work deals with the optimum placement of the compensating device (FACTS device) to improve the performance of existing transmission lines. The transmission line parameters have been obtained and analysis has been done on that parameters. The results reveal that: Power transfer capability and voltage profile of transmission line is improved with compensating device. Also the effect of location of compensating device on transmission line is studied. Moreover the software package developed using MatLab is found to be quite useful as its working is independent of transmission line length and impedance of series/shunt/series-shunt compensating device. The results demonstrate the performance of transmission line when the location of compensating device is varied.
    01/2009;
  • [Show abstract] [Hide abstract]
    ABSTRACT: This paper presents a Bibliography of Flexible AC Transmission Systems (FACTS) for the year 2002.
    01/2007;
  • Source
    [Show abstract] [Hide abstract]
    ABSTRACT: As power electronics are increasingly used in power-electric networks, there is an interest in the creation of time-domain simulation techniques that can model the diversity of the integrative power-electric and electronic system while achieving high accuracy and computational speed. In the proposed method, generation of electric network equivalents (GENE), this is supported through the nested structure of the overall simulation process. One or multiple parent simulations, in which the unknown voltages are calculated using nodal analysis, launch multiple child simulations concerned with diakoptic subdivisions of the system under study. The interfaces for information exchange between parent and child levels are designed to provide encapsulation. This makes the subdivisions appearing from outside in the form of network branches compatible with the nodal analysis approach. It also facilitates the use of diverse solution methods for different child simulations, as it is shown for the simultaneous solution of equations formulated with nodal analysis and state space methods. Computational efficiency is obtained through the coordinated application of sparse-matrix methods, piecewise linear approximation of nonlinear characteristics, and precalculation of operations pertaining to recurring power-electronic switch statuses. The resulting overall solution process is simultaneous, distributed, and suitable for real-time simulation. The devised methodology is validated through simulation of the CIGRE HVdc benchmark model, comprising ac networks, twelve-pulse power-electronic converter stations, harmonic filters, and dc transmission
    IEEE Transactions on Power Delivery 02/2007; · 1.52 Impact Factor