Article

A Dynamic State Space Model of a MHO Distance Relay

Department of Electrical Engineering University of Southern California
IEEE Transactions on Power Apparatus and Systems 01/1986; DOI: 10.1109/TPAS.1985.318910
Source: IEEE Xplore

ABSTRACT Traditional relay analysis is based on steady-state concepts, while the performance of a relay depends greatly on system transient. To deal with the relay transient characteristics, a relay modeling technique is developed and presented in this paper. As an example, a ninth-order mathematical model of the electromechanical Mho distance relay has been constructed using state space approach and validated by digital simulation. A key point of the model, derivation of the nonlinear electromagnetic torque, is described in detail. Since the model is capable of accepting inputs with arbitrary waveforms from PT and CT in computing its transient response, a set of truly dynamic characteristics of the relay was obtained. Combining the relay model with well-developed PT and CT mathematical models, the transient behavior of relays during a system contingency can be precisely predicted.

1 Follower
 · 
166 Views
  • [Show abstract] [Hide abstract]
    ABSTRACT: This paper derives, and explains the use of new numerical comparator concepts. These numerical techniques are new approaches to time domain based relaying algorithms. The initial treatment of the paper concentrates on the generalized idea of a phase comparator and the cylinder unit in particular. The focus in the cylinder unit is to extrapolate for digital relaying purposes, the benefits and characteristics of the well known and widely used relaying unit. The application of the numerical comparator techniques are illustrated with practical units. Distance, directional and over-threshold units illustrate the procedure to obtain protective relaying units using the numerical comparator concepts
    IEEE Transactions on Power Delivery 08/1996; DOI:10.1109/61.517480 · 1.66 Impact Factor
  • [Show abstract] [Hide abstract]
    ABSTRACT: This paper presents a new approach for interactive power network protection system simulation. In the new approach, power system transients are simulated using an Electromagnetic Transients Program (EMTP), while protective relays can be modeled using any high-level language or commercially available software package, such as MATLAB. The interactions between power systems and relays are implemented by using an “interaction buffer”. Using this technique, the EMTP can be run in single-step, multiple-step or mixed mode. This new approach makes the protection system simulation quite efficient, flexible and accurate
    IEEE Transactions on Power Delivery 05/1997; DOI:10.1109/61.584336 · 1.66 Impact Factor
  • Source
    [Show abstract] [Hide abstract]
    ABSTRACT: This paper reviews the past and present uses of relay models. It discusses the various types of models, what information is required to build such models and the model validation process. Examples of present and possible future use of software models are given
    IEEE Transactions on Power Delivery 05/2001; DOI:10.1109/61.915489 · 1.66 Impact Factor