Article

Chemical Recycling off Carbon Dioxide to Methanol and Dimethyl Ether: From Greenhouse Gas to Renewable, Environmentally Carbon Neutral Fuels and Synthetic Hydrocarbons

Loker Hydrocarbon Research Institute and Department of Chemistry, University of Southern California, University Park, Los Angeles, California 90089-1661, USA.
The Journal of Organic Chemistry (Impact Factor: 4.64). 01/2009; 74(2):487-98. DOI: 10.1021/jo801260f
Source: PubMed

ABSTRACT Nature's photosynthesis uses the sun's energy with chlorophyll in plants as a catalyst to recycle carbon dioxide and water into new plant life. Only given sufficient geological time can new fossil fuels be formed naturally. In contrast, chemical recycling of carbon dioxide from natural and industrial sources as well as varied human activities or even from the air itself to methanol or dimethyl ether (DME) and their varied products can be achieved via its capture and subsequent reductive hydrogenative conversion. The present Perspective reviews this new approach and our research in the field over the last 15 years. Carbon recycling represents a significant aspect of our proposed Methanol Economy. Any available energy source (alternative energies such as solar, wind, geothermal, and atomic energy) can be used for the production of needed hydrogen and chemical conversion of CO(2). Improved new methods for the efficient reductive conversion of CO(2) to methanol and/or DME that we have developed include bireforming with methane and ways of catalytic or electrochemical conversions. Liquid methanol is preferable to highly volatile and potentially explosive hydrogen for energy storage and transportation. Together with the derived DME, they are excellent transportation fuels for internal combustion engines (ICE) and fuel cells as well as convenient starting materials for synthetic hydrocarbons and their varied products. Carbon dioxide thus can be chemically transformed from a detrimental greenhouse gas causing global warming into a valuable, renewable and inexhaustible carbon source of the future allowing environmentally neutral use of carbon fuels and derived hydrocarbon products.

2 Followers
 · 
425 Views
  • Source
    [Show abstract] [Hide abstract]
    ABSTRACT: Carbon dioxide capture and use as a carbon feedstock presents both environmental and industrial benefits. Here we report the discovery of a hybrid oxide catalyst comprising manganese oxide nanoparticles supported on mesoporous spinel cobalt oxide, which catalyses the conversion of carbon dioxide to methanol at high yields. In addition, carbon– carbon bond formation is observed through the production of ethylene. We document the existence of an active interface between cobalt oxide surface layers and manganese oxide nanoparticles by using X-ray absorption spectroscopy and electron energy-loss spectroscopy in the scanning transmission electron microscopy mode. Through control experiments, we find that the catalyst's chemical nature and architecture are the key factors in enabling the enhanced methanol synthesis and ethylene production. To demonstrate the industrial applicability, the catalyst is also run under high conversion regimes, showing its potential as a substitute for current methanol synthesis technologies.
    Nature Communications 04/2015; 6. DOI:10.1038/ncomms7538 · 10.74 Impact Factor
  • [Show abstract] [Hide abstract]
    ABSTRACT: The use of "nonideal" zeolite membranes for the in situ H2O removal in a packed-bed membrane reactor (PBMR) during the synthesis of dimethyl ether (DME) allows the recovery of CO2 but unexpectedly reduces DME yield by 50% in comparison to a packed-bed reactor (PBR) as previously reported [ Diban et al. Chem. Eng. J. 2013, 234, 140 ]. Due to the advantageous performance of PBMR, the present work aims to the theoretical analysis and optimization of the working conditions and system configuration that enhance both DME yield and CO2 recovery. Here, the previously developed mathematical model able to predict the mass transport rate of all the components present in the reactive system through zeolite membranes has been modified and accounts for the sweep gas recirculation. The influence of the sweep gas flow-rate in the range 0.06-1.80 molCOx·h-1 (laboratory scale) and sweep gas recirculation factor (0 < α < 1) has been analyzed. Sweep gas flow-rates >0.18 molCOx·h-1 favored CO2 conversion but only partial recirculation of the sweep gas promoted DME yields beyond those obtained in a PBR due to the synergism between effective H2O removal and MeOH retention in the feed side. Although energetically challenging, these results show promising prospects to apply the existing zeolite membranes for the chemical transformation of CO2 into DME on a large scale.
    Industrial & Engineering Chemistry Research 12/2014; 53(50):19479. DOI:10.1021/ie503663h · 2.24 Impact Factor
  • [Show abstract] [Hide abstract]
    ABSTRACT: Carbon dioxide (CO2) can be electrochemically reduced to useful products under mild condition. In recent years, increased attempts have been devoted to use ionic liquid (IL) as the solvents, electrolytes and catalysts for CO2 reduction. However, owing to the high viscosity of ILs, CO2 diffusion in ILs is restrained, lead to low current density of CO2 reduction. To overcome this problem, in present work, we used methanol as the organic solvent to dilute 1-Ethyl-3-Methylimidazolium BF4 ([EmiBF4), an commonly used IL in electrochemistry, the obtained [BmiBF4/methanol solution have many unique properties, such as low viscosity, high ionic conductivity, high CO2 solubility and low cost. The current density of CO2 reduction reached 14.2 mA/cm2 at-1.95V (vs SCE) on Ag electrode. Electrochemical reduction of CO2 in [BmiBF4/methanol solution provides a hopeful technique for CO2 recycling utilization and renewable electrical energy storage.
    09/2013; 781-784:2573-2576. DOI:10.4028/www.scientific.net/AMR.781-784.2573

Preview

Download
17 Downloads
Available from