A promising inert support for laccase production and decolouration of textile wastewater by the white-rot fungus Trametes pubescens

CEIT, Unit of Environmental Engineering, San Sebastian, Spain.
Journal of hazardous materials (Impact Factor: 4.53). 07/2012; 233-234:158-62. DOI: 10.1016/j.jhazmat.2012.07.003
Source: PubMed


Cubes of nylon sponge, cubes of polyurethane foam (PUF), cuttings of stainless steel sponges and the commercial carriers Kaldnes™ K1 were tested as inert supports for laccase production by the white-rot fungus Trametes pubescens under semi-solid-state fermentation conditions. The cultures operating with Kaldnes™ K1 led to the highest laccase activity (3667 U/l). In addition this support could be re-utilised, making the whole process more economical. Subsequently, the decolouration of simulated textile wastewater (STW) by T. pubescens grown on the different tested supports under semi-solid-state fermentation conditions was studied. Decolouration percentages around 66-80% were obtained in 96 h. It was found that STW decolouration was due to two mechanisms: laccase action (biodegradation) and adsorption onto fungal mycelium, save for the PUF cultures in which decolouration was mainly due to adsorption onto the support. Further, the decolouration of STW by Kaldnes™ K1 cultures in three successive batches of 96 h each was studied. Decolouration percentages of 51.3, 70.0 and 69.8%, were attained for each batch, respectively.

Download full-text


Available from: Susana Rodriguez-Couto, Oct 09, 2015
1 Follower
42 Reads
  • Source
    • "The medium composition, in particular the carbon source, nutrients and some additives in the fungal broth are key factors for the pelletization process. The influence of different carbon sources (e.g., sucrose, glucose, fructose and xylose) on the growth morphology of different fungal strains has been widely reported [29] [30] [31] [32]. Réczey et al. [33] reported that various strains of Aspergillus niger grew as free mycelia when lactose was used as a carbon source. "
    [Show abstract] [Hide abstract]
    ABSTRACT: The use of fungal species to remove organic and inorganic pollutants from wastewater has shown to be a good alternative to traditional wastewater treatment technologies. Fungal pellets are well settling aggregates formed by self-immobilization. Their use in bioreactors is promising as it avoids the practical and technical difficulties usually encountered with dispersed mycelium. This review presents the mechanisms involved in the formation and growth of fungal pellets as well as the different factors that influence the stability of the pellets. The various types of fungal pelleted bioreactors that are used for wastewater treatment, their configuration, design and performance are reviewed. A summary of the different organic and inorganic pollutants that have been treated using fungal pelleted reactors, from dyes to emergent pollutants such as pharmaceuticals, is discussed from an application view-point. The operational issues such as bacterial contamination and longevity of this bioprocess under non-sterile conditions, as well as the reuse of fungal pellets are also encompassed in this review.
    Chemical Engineering Journal 01/2016; 283:553-571. DOI:10.1016/j.cej.2015.07.06810.1016/j.cej.2015.07.068 · 4.32 Impact Factor
  • Source
    • "to the experiment, and 20 mL of culture medium. The culture medium composition was the same as that of the medium M1 described in Rodriguez-Couto [16] and consisted of 10 g/L glucose, 20 g/L yeast extract, "
    [Show abstract] [Hide abstract]
    ABSTRACT: The decolouration of the metal-complex dyes Bemaplex Navy M-T (150 mg/L) and Bezaktiv Blue BA (150 mg/L) in nine successive batches by immobilised cultures of the white-rot fungus Trametes pubescens was studied. Two different types of immobilisation supports were used: the commercial carriers Kaldnes™ K1 (synthetic supports) and sunflower-seed shells (SS) (natural supports). Bemaplex showed more resistance to degradation by T. pubescens cultures than Bezaktiv, especially in the K1 cultures. Thus, SS cultures led to decolouration percentages higher than 59% for Bemaplex in all the batches save for the last two and higher than 50% for Bezaktiv in all the batches except for the 2nd and 9th ones. K1 cultures showed decolouration percentages for Bemaplex higher than 42% in batches 1, 3, 4, 5 and 7 and for Bezaktiv higher than 70% in all the batches save for the last one. Dye decolouration was mainly due to enzyme action (biodegradation).
    Biotechnology Reports 10/2014; 4(1). DOI:10.1016/j.btre.2014.10.006
  • Source
    • "In addition, it allows the design of suitable production media. Moreover, as the physical structure of the inert support is maintained throughout the process it can be reutilised (Rodríguez-Couto, 2012). "
    [Show abstract] [Hide abstract]
    ABSTRACT: The production of neomycin by the actinomycete Streptomyces fradiae, under semi-solid-state fermentation conditions was the main subject of this study. Two supports (nylon sponge and orange peelings) were tested in order to determine the most suitable one for the production of neomycin by the above-mentioned microorganism. Nylon sponge led to the highest neomycin production, reaching a maximum value of 13,903μg/mL on the 10(th) day of cultivation. As a control, the same experiment was performed under submerged fermentation (SmF) conditions, without solid support. Here the production of neomycin by S. fradiae was about 55-fold lower (i.e. 250μg/mL) than that obtained for SSF.
    Journal of Biotechnology 04/2013; 165(3-4). DOI:10.1016/j.jbiotec.2013.03.015 · 2.87 Impact Factor
Show more