Conference Paper

Wireless Sensor Networks Powered by Ambient Energy Harvesting (WSN-HEAP) - Survey and Challenges

Networking Protocols Dept., Inst. for Infocomm Res., Singapore, Singapore
DOI: 10.1109/WIRELESSVITAE.2009.5172411 Conference: Wireless Communication, Vehicular Technology, Information Theory and Aerospace & Electronic Systems Technology, 2009. Wireless VITAE 2009. 1st International Conference on
Source: IEEE Xplore

ABSTRACT Wireless sensor networks (WSNs) research has pre-dominantly assumed the use of a portable and limited energy source, viz. batteries, to power sensors. Without energy, a sensor is essentially useless and cannot contribute to the utility of the network as a whole. Consequently, substantial research efforts have been spent on designing energy-efficient networking protocols to maximize the lifetime of WSNs. However, there are emerging WSN applications where sensors are required to operate for much longer durations (like years or even decades) after they are deployed. Examples include in-situ environmental/habitat monitoring and structural health monitoring of critical infrastructures and buildings, where batteries are hard (or impossible) to replace/recharge. Lately, an alternative to powering WSNs is being actively studied, which is to convert the ambient energy from the environment into electricity to power the sensor nodes. While renewable energy technology is not new (e.g., solar and wind) the systems in use are far too large for WSNs. Those small enough for use in wireless sensors are most likely able to provide only enough energy to power sensors sporadically and not continuously. Sensor nodes need to exploit the sporadic availability of energy to quickly sense and transmit the data. This paper surveys related research and discusses the challenges of designing networking protocols for such WSNs powered by ambient energy harvesting.

Download full-text

Full-text

Available from: Winston K. G. Seah, Jul 01, 2015
3 Followers
 · 
706 Views
  • Source
    [Show abstract] [Hide abstract]
    ABSTRACT: Wireless sensor networks (WSNs) are designed for sensing phenomenon and acquiring data. In structural health monitoring (SHM) of critical infrastructure, increasingly large number of sensor nodes are deployed to acquire data at the spatial density needed for structural integrity assessment. After rare catastrophic events (like earthquakes) a large volume of data related to the event can be produced in an instant, and need to be sent (to remote locations) for analysis. When many nodes are trying to transmit their data simultaneously, the contention for the wireless channel increases the probability of packet collisions resulting in packet drops, multiple retransmission attempts and consequently delays; it is also not uncommon to find certain nodes (e.g. closer to the sink) having better chances of successful transmission leading to biased data delivery. While clustering has been extensively used to reduce contention in wireless networks, the performance criteria for the network is still very node-focused. This paper presents a new perspective on cluster-based WSNs and proposes a cluster centric design that aims to tackle medium access control (MAC) layer congestion associated with burst packet generation in an unbiased manner, making it suitable for applications like SHM.
    13th International Symposium on Modeling and Optimization in Mobile, Ad Hoc, and Wireless Networks (WiOpt), Mumbai, India; 05/2015
  • Source
    [Show abstract] [Hide abstract]
    ABSTRACT: We consider networked control of luminaires to adapt illumination in an indoor environment to occupancy and daylight based on distributed light-harvesting wireless sensing modules. Each light-harvesting wireless sensing module consists of an occupancy sensor, a light sensor, a wireless radio, a microcontroller unit, and a photovoltaic cell. The occupancy sensor and light sensor, respectively, determine presence and illumination level within their fields-of-view. This local sensor information, along with control information from neighboring sensing modules, is used by a local controller to determine the dimming level of its luminaire so as to achieve its reference setpoint. To realize this system, we propose a low-power wireless sensing protocol and a neighbor-aided illumination control method considering the harvesting constraints of the sensors. The proposed methods are implemented in an indoor lighting system testbed and the performance is shown to meet desired illumination conditions.
    IEEE Sensors Journal 03/2015; 15(3):1662-1669. DOI:10.1109/JSEN.2014.2365671 · 1.85 Impact Factor
  • Source
    [Show abstract] [Hide abstract]
    ABSTRACT: This paper investigates the simultaneous wireless power and information transfer (SWPIT) for network-coded two-way re- lay transmission from an information theoretical viewpoint, where two sources exchange information via an energy har- vesting relay. By considering the time switching (TS) relay receiver architecture, we present the TS-based two-way re- laying (TS-TWR) protocol. In order to explore the system throughput limit with data rate fairness, we formulate an op- timization problem under total power constraint. To solve the problem, we first derive some explicit results and then de- sign an efficient algorithm. Numerical results show that with the same total available power, TS-TWR has a certain per- formance loss compared with conventional non-EH two-way relaying due to the path loss effect on energy transfer, where in relatively low and relatively high SNR regimes, the perfor- mance losses are relatively small.