A comparative study of diffusion of benzene/p-xylene mixtures in MFI particles, pellets and grown membranes
Journal Article: CATALYSIS TODAY 168:147-157.
Abstract
The transport and separation of mixtures between benzene and p-xylene in pellets prepared by pressing of ZSM-5 powder and a dense supported (crystalline) Silicalite-1 membrane were compared to isolated ZSM-5 crystallites. The kinetics of the transport in the pressed pellet and the grown membrane determined in a Wicke-Kallenbach cell (313-403 K; partial pressure range 200-2300 Pa) differed significantly from those measured for isolated ZSM-5 particles with the pressure modulation frequency response technique (343-403 K; partial pressure 30 Pa). In a pressed pellet, the transport was of Knudsen type leading to high fluxes of 10(-4) mol/m(2) s and identical permeances for benzene and p-xylene. The diffusion coefficient in a pressed pellet exceeded that in particles, in which the transport was controlled by intracrystalline diffusion and the pore entrance step, by 8 orders of magnitude. The flux across a grown Silicalite-1 membrane was two orders of magnitude lower and the permeability of p-xylene was 2.6-5 times higher than that of benzene. The change in diffusivity in the membrane compared to the particles results from the higher surface coverage of p-xylene. (C) 2011 Elsevier B.V. All rights reserved.
Comments on this publication
ResearchGate members can add comments. Sign up now and post your comment!
Data provided are for informational purposes only. Although carefully collected, accuracy cannot be guaranteed. The impact factor represents a rough estimation of the journal's impact factor and does not reflect the actual current impact factor. Publisher conditions are provided by RoMEO. Differing provisions from the publisher's actual policy or licence agreement may be applicable.
Science & Research Jobs
CSIRO - Postdoctoral Fellow - Statistician
Position: PostDoc Position
Employer: Commonwealth Scientific and Industr...
PRAS-Healthcare-Scientist for MRI Coil Design
Position: Other
Employer: Philips (China) Investment Co.,Ltd

