Questions and Answers (1) View all
-
Question asked in Fluid MechanicsOpen Is there critical film thickness where a continous fluid film breaks down?I was interested in finding critical height in squeeze flow where the continuous fluid volume breaks down. What would be the correlation between fluid... [more]
Publications (30) View all
-
Article: Microcalcifications increase coronary vulnerable plaque rupture potential: a patient-based micro-CT fluid-structure interaction study.
[show abstract] [hide abstract]
ABSTRACT: Asymptomatic vulnerable plaques (VP) in coronary arteries accounts for significant level of morbidity. Their main risk is associated with their rupture which may prompt fatal heart attacks and strokes. The role of microcalcifications (micro-Ca), embedded in the VP fibrous cap, in the plaque rupture mechanics has been recently established. However, their diminutive size offers a major challenge for studying the VP rupture biomechanics on a patient specific basis. In this study, a highly detailed model was reconstructed from a post-mortem coronary specimen of a patient with observed VP, using high resolution micro-CT which captured the microcalcifications embedded in the fibrous cap. Fluid-structure interaction (FSI) simulations were conducted in the reconstructed model to examine the combined effects of micro-Ca, flow phase lag and plaque material properties on plaque burden and vulnerability. This dynamic fibrous cap stress mapping elucidates the contribution of micro-Ca and flow phase lag VP vulnerability independently. Micro-Ca embedded in the fibrous cap produced increased stresses predicted by previously published analytical model, and corroborated our previous studies. The 'micro-CT to FSI' methodology may offer better diagnostic tools for clinicians, while reducing morbidity and mortality rates for patients with vulnerable plaques and ameliorating the ensuing healthcare costs.Annals of biomedical engineering 01/2012; 40(7):1443-54. · 2.41 Impact Factor -
Article: Fluid structure interaction with contact surface methodology for evaluation of endovascular carotid implants for drug-resistant hypertension treatment.
[show abstract] [hide abstract]
ABSTRACT: Drug-resistant hypertensive patients may be treated by mechanical stimulation of stretch-sensitive baroreceptors located in the sinus of carotid arteries. To evaluate the efficacy of endovascular devices to stretch the carotid sinus such that the induced strain might trigger baroreceptors to increase action potential firing rate and thereby reduce systemic blood pressure, numerical simulations were conducted of devices deployed in subject-specific carotid models. Two models were chosen--a typical physiologic carotid and a diminutive atypical physiologic model representing a clinically worst case scenario--to evaluate the effects of device deployment in normal and extreme cases, respectively. Based on the anatomical dimensions of the carotids, two different device sizes were chosen out of five total device sizes available. A fluid structure interaction (FSI) simulation methodology with contact surface between the device and the arterial wall was implemented for resolving the stresses and strains induced by device deployment. Results indicate that device deployment in the carotid sinus of the physiologic model induces an increase of 2.5% and 7.5% in circumferential and longitudinal wall stretch, respectively, and a maximum of 54% increase in von Mises arterial stress at the sinus wall baroreceptor region. The second device, deployed in the diminutive carotid model, induces an increase of 6% in both circumferential and longitudinal stretch and a 50% maximum increase in von Mises stress at the sinus wall baroreceptor region. Device deployment has a minimal effect on blood-flow patterns, indicating that it does not adversely affect carotid bifurcation hemodynamics in the physiologic model. In the smaller carotid model, deployment of the device lowers wall shear stress at sinus by 16% while accelerating flow entering the external carotid artery branch. Our FSI simulations of carotid arteries with deployed device show that the device induces localized increase in wall stretch at the sinus, suggesting that this will activate baroreceptors and subsequently may control hypertension in drug-resistant hypertensive patients, with no consequential deleterious effects on the carotid sinus hemodynamics.Journal of Biomechanical Engineering 04/2012; 134(4):041001. · 1.90 Impact Factor -
Conference Proceeding: Patient based Abdominal Aortic Aneurysm rupture risk prediction combining clinical visualizing modalities with fluid structure interaction numerical simulations
[show abstract] [hide abstract]
ABSTRACT: Fluid structure interaction (FSI) simulations of patient-specific fusiform non-ruptured and contained ruptured Abdominal Aortic Aneurysm (AAA) geometries were conducted. The goals were: (1) to test the ability of our FSI methodology to predict the location of rupture, by correlating the high wall stress regions with the rupture location, (2) estimate the state of the pathological condition by calculating the ruptured potential index (RPI) of the AAA and (3) predict the disease progression by comparing healthy and pathological aortas. The patient specific AAA FSI simulations were carried out with advanced constitutive material models of the various components of AAA, including models that describe wall anisotropy based on collagen fibers orientation within the arterial wall, structural strength of the aorta, intraluminal thrombus (ILT), and embedded calcifications. The anisotropic material model used to describe the wall properties closely correlated with experimental results of AAA specimens. The results demonstrate that the anisotropic wall simulations showed higher peak wall stresses as compared to isotropic material models, indicating that the latter may underestimate the AAA risk of rupture. The ILT appeared to provide a cushioning effect reducing the stresses, while small calcifications (small-Ca) appeared to weaken the wall and contribute to the rupture risk. FSI simulations with ruptured AAA demonstrated that the location of the maximal wall stresses and RPI overlap the actual rupture region.Engineering in Medicine and Biology Society (EMBC), 2010 Annual International Conference of the IEEE; 10/2010 -
Article: Device thrombogenicity emulation: a novel method for optimizing mechanical circulatory support device thromboresistance.
[show abstract] [hide abstract]
ABSTRACT: Mechanical circulatory support (MCS) devices provide both short and long term hemodynamic support for advanced heart failure patients. Unfortunately these devices remain plagued by thromboembolic complications associated with chronic platelet activation--mandating complex, lifelong anticoagulation therapy. To address the unmet need for enhancing the thromboresistance of these devices to extend their long term use, we developed a universal predictive methodology entitled Device Thrombogenicity Emulation (DTE) that facilitates optimizing the thrombogenic performance of any MCS device--ideally to a level that may obviate the need for mandatory anticoagulation. DTE combines in silico numerical simulations with in vitro measurements by correlating device hemodynamics with platelet activity coagulation markers--before and after iterative design modifications aimed at achieving optimized thrombogenic performance. DTE proof-of-concept is demonstrated by comparing two rotary Left Ventricular Assist Devices (LVADs) (DeBakey vs HeartAssist 5, Micromed Houston, TX), the latter a version of the former following optimization of geometrical features implicated in device thrombogenicity. Cumulative stresses that may drive platelets beyond their activation threshold were calculated along multiple flow trajectories and collapsed into probability density functions (PDFs) representing the device 'thrombogenic footprint', indicating significantly reduced thrombogenicity for the optimized design. Platelet activity measurements performed in the actual pump prototypes operating under clinical conditions in circulation flow loops--before and after the optimization with the DTE methodology, show an order of magnitude lower platelet activity rate for the optimized device. The robust capability of this predictive technology--demonstrated here for attaining safe and cost-effective pre-clinical MCS thrombo-optimization--indicates its potential for reducing device thrombogenicity to a level that may significantly limit the extent of concomitant antithrombotic pharmacotherapy needed for safe clinical device use.PLoS ONE 01/2012; 7(3):e32463. · 4.09 Impact Factor -
Article: The effect of angulation in abdominal aortic aneurysms: fluid-structure interaction simulations of idealized geometries.
[show abstract] [hide abstract]
ABSTRACT: Abdominal aortic aneurysm (AAA) represents a degenerative disease process of the abdominal aorta that results in dilation and permanent remodeling of the arterial wall. A fluid structure interaction (FSI) parametric study was conducted to evaluate the progression of aneurysmal disease and its possible implications on risk of rupture. Two parametric studies were conducted using (i) the iliac bifurcation angle and (ii) the AAA neck angulation. Idealized streamlined AAA geometries were employed. The simulations were carried out using both isotropic and anisotropic wall material models. The parameters were based on CT scans measurements obtained from a population of patients. The results indicate that the peak wall stresses increased with increasing iliac and neck inlet angles. Wall shear stress (WSS) and fluid pressure were analyzed and correlated with the wall stresses for both sets of studies. An adaptation response of a temporary reduction of the peak wall stresses seem to correlate to a certain extent with increasing iliac angles. For the neck angulation studies it appears that a breakdown from symmetric vortices at the AAA inlet into a single larger vortex significantly increases the wall stress. Our parametric FSI study demonstrates the adaptation response during aneurysmal disease progression and its possible effects on the AAA risk of rupture. This dependence on geometric parameters of the AAA can be used as an additional diagnostic tool to help clinicians reach informed decisions in establishing whether a risky surgical intervention is warranted.Medical & Biological Engineering 11/2010; 48(12):1175-90. · 1.76 Impact Factor
