Saim Özkar

Middle East Technical University · Department of Chemistry

Research interests

  • Interests
    Hydrogen Storage, Hydrogenation, Heterogeneous Catalysis, Nanoparticles, Catalyst

Publications

  • 4.08
    Impact points
    Catalytic methanolysis of hydrazine borane: a new and efficient hydrogen generation system under mild conditions.

    Senem Karahan, Mehmet Zahmakıran, Saim Ozkar

    Dalton transactions (Cambridge, England : 2003). 03/2012; 41(16):4912-8.

    Safe and efficient hydrogen storage is a major obstacle for using hydrogen as an energy carrier. Therefore, intensive efforts have been focused on the development of new materials for chemical hydrogen storage. Of particular importance, hydrazine borane (N(2)H(4)BH(3)) is emerging as one of the most... [more] Safe and efficient hydrogen storage is a major obstacle for using hydrogen as an energy carrier. Therefore, intensive efforts have been focused on the development of new materials for chemical hydrogen storage. Of particular importance, hydrazine borane (N(2)H(4)BH(3)) is emerging as one of the most promising solid hydrogen carriers due to its high gravimetric hydrogen storage capacity (15.4 wt%) and low molecular weight. Herein, we report metal catalyzed methanolysis of hydrazine borane (N(2)H(4)BH(3), HB) as a fast hydrogen generation system under mild conditions. When trace amounts of nickel(ii) chloride (NiCl(2)) is added to the methanol solution of hydrazine borane ([HB]/[Ni] ≥ 200) the reaction solution releases 3 equiv. of H(2) with a rate of 24 mol H(2) (mol Ni min)(-1) at room temperature. The results reported here also includes (i) identification of the reaction products by using ATR-IR, DP-MS, (1)H and (11)B NMR spectroscopic techniques and the establishment of the reaction stoichiometry, (ii) investigation of the effect of substrate and catalyst concentrations on the hydrogen generation rate to determine the rate law for the catalytic methanolysis of hydrazine borane, (iii) determination of the activation parameters (E(a), ΔH(#), and ΔS(#)) for the catalytic methanolysis of hydrazine borane by using the temperature dependent rate data of the hydrogen generation.
  • 5.50
    Impact points
    A facile one-step synthesis of polymer supported rhodium nanoparticles in organic medium and their catalytic performance in the dehydrogenation of ammonia-borane.

    Senem Karahan, Mehmet Zahmakıran, Saim Özkar

    Chemical communications (Cambridge, England). 12/2011; 48(8):1180-2.

    A new type of supported rhodium nanoparticles were reproducibly prepared from N(2)H(4)BH(3) reduction of [Rh(μ-Cl)(1,5-cod)](2) without using any solid support and pre-treatment technique. Their characterization shows the formation of well dispersed rhodium(0) nanoparticles within the framework of a... [more] A new type of supported rhodium nanoparticles were reproducibly prepared from N(2)H(4)BH(3) reduction of [Rh(μ-Cl)(1,5-cod)](2) without using any solid support and pre-treatment technique. Their characterization shows the formation of well dispersed rhodium(0) nanoparticles within the framework of a polyaminoborane based polymeric support. These new rhodium(0) nanoparticles were found to be the most active supported catalyst in the catalytic dehydrogenation of ammonia-borane in water at room temperature.
  • 8.58
    Impact points
    Is it homogeneous or heterogeneous catalysis derived from [RhCp*Cl2]2? In operando XAFS, kinetic, and crucial kinetic poisoning evidence for subnanometer Rh4 cluster-based benzene hydrogenation catalysis.

    Ercan Bayram, John C Linehan, John L Fulton, John A S Roberts, Nathaniel K Szymczak, Tricia D Smurthwaite, Saim Özkar, Mahalingam Balasubramanian, Richard G Finke

    Journal of the American Chemical Society. 11/2011; 133(46):18889-902.

    Determining the true, kinetically dominant catalytically active species, in the classic benzene hydrogenation system pioneered by Maitlis and co-workers 34 years ago starting with [RhCp*Cl(2)](2) (Cp* = [η(5)-C(5)(CH(3))(5)]), has proven to be one of the most challenging case studies in the quest to... [more] Determining the true, kinetically dominant catalytically active species, in the classic benzene hydrogenation system pioneered by Maitlis and co-workers 34 years ago starting with [RhCp*Cl(2)](2) (Cp* = [η(5)-C(5)(CH(3))(5)]), has proven to be one of the most challenging case studies in the quest to distinguish single-metal-based "homogeneous" from polymetallic, "heterogeneous" catalysis. The reason, this study will show, is the previous failure to use the proper combination of: (i) in operando spectroscopy to determine the dominant form(s) of the precatalyst's mass under catalysis (i.e., operating) conditions, and then crucially also (ii) the previous lack of the necessary kinetic studies, catalysis being a "wholly kinetic phenomenon" as J. Halpern long ago noted. An important contribution from this study will be to reveal the power of quantitiative kinetic poisoning experiments for distinguishing single-metal, or in the present case subnanometer Rh(4) cluster-based catalysis, from larger, polymetallic Rh(0)(n) nanoparticle catalysis, at least under favorable conditions. The combined in operando X-ray absorption fine structure (XAFS) spectroscopy and kinetic evidence provide a compelling case for Rh(4)-based, with average stoichiometry "Rh(4)Cp*(2.4)Cl(4)H(c)", benzene hydrogenation catalysis in 2-propanol with added Et(3)N and at 100 °C and 50 atm initial H(2) pressure. The results also reveal, however, that if even ca. 1.4% of the total soluble Rh(0)(n) had formed nanoparticles, then those Rh(0)(n) nanoparticles would have been able to account for all the observed benzene hydrogenation catalytic rate (using commercial, ca. 2 nm, polyethyleneglycol-dodecylether hydrosol stabilized Rh(0)(n) nanoparticles as a model system). The results--especially the poisoning methodology developed and employed--are of significant, broader interest since determining the nature of the true catalyst continues to be a central, often vexing issue in any and all catalytic reactions. The results are also of fundamental interest in that they add to a growing body of evidence indicating that certain, appropriately ligated, coordinatively unsaturated, subnanometer M(4) transition-metal clusters can be relatively robust catalysts. Also demonstrated herein is that Rh(4) clusters are poisoned by Hg(0), demonstrating for the first time that the classic Hg(0) poisoning test of "homogeneous" vs "heterogeneous" catalysts cannot distinguish Rh(4)-based subnanometer catalysts from Rh(0)(n) nanoparticle catalysts, at least for the present examples of these two specific, Rh-based catalysts.
  • 4.08
    Impact points
    Size-controllable APTS stabilized ruthenium(0) nanoparticles catalyst for the dehydrogenation of dimethylamine-borane at room temperature.

    Mehmet Zahmakıran, Karine Philippot, Saim Özkar, Bruno Chaudret

    Dalton transactions (Cambridge, England : 2003). 11/2011; 41(2):590-8.

    Dimethylamine-borane, (CH(3))(2)NHBH(3), has been considered as one of the attractive materials for the efficient storage of hydrogen, which is still one of the key issues in the "Hydrogen Economy". In a recent communication we have reported the synthesis and characterization of 3-aminopro... [more] Dimethylamine-borane, (CH(3))(2)NHBH(3), has been considered as one of the attractive materials for the efficient storage of hydrogen, which is still one of the key issues in the "Hydrogen Economy". In a recent communication we have reported the synthesis and characterization of 3-aminopropyltriethoxysilane stabilized ruthenium(0) nanoparticles with the preliminary results for their catalytic performance in the dehydrogenation of dimethylamine-borane at room temperature. Herein, we report a complete work including (i) effect of initial [APTS]/[Ru] molar ratio on both the size and the catalytic activity of ruthenium(0) nanoparticles, (ii) collection of extensive kinetic data under non-MTL conditions depending on the substrate and catalyst concentrations to define the rate law of Ru(0)/APTS-catalyzed dehydrogenation of dimethylamine-borane at room temperature, (iii) determination of activation parameters (E(a), ΔH(#) and ΔS(#)) for Ru(0)/APTS-catalyzed dehydrogenation of dimethylamine-borane; (iv) demonstration of the catalytic lifetime of Ru(0)/APTS nanoparticles in the dehydrogenation of dimethylamine-borane at room temperature, (v) testing the bottlability and reusability of Ru(0)/APTS nanocatalyst in the room-temperature dehydrogenation of dimethylamine-borane, (vi) quantitative carbon disulfide (CS(2)) poisoning experiments to find a corrected TTO and TOF values on a per-active-ruthenium-atom basis, (vii) a summary of extensive literature review for the catalysts tested in the catalytic dehydrogenation of dimethylamine-borane as part of the results and discussions.
  • Metal nanoparticles in liquid phase catalysis; from recent advances to future goals.

    Mehmet Zahmakıran, Saim Ozkar

    Nanoscale. 08/2011; 3(9):3462-81.

    Metal nanoparticles have attracted much attention over the last decade owing to their unique properties, different to their bulk counterparts, which pave the way for their application in different fields from materials science and engineering to biomedical applications. Of particular interest, the u... [more] Metal nanoparticles have attracted much attention over the last decade owing to their unique properties, different to their bulk counterparts, which pave the way for their application in different fields from materials science and engineering to biomedical applications. Of particular interest, the use of metal nanoparticles in catalysis has brought superior efficiency in terms of activity, selectivity and lifetime to heterogeneous catalysis. This article reviews the recent developments in the synthesis routes and the catalytic performance of metal nanoparticles depending on the solvent used for various organic and inorganic transformations. Additionally, we also discuss the prevalent complications and their possible solutions plus future prospects in the field of nanocatalysis.
  • 3.90
    Impact points
    Industrial Ziegler-type hydrogenation catalysts made from Co(neodecanoate)2 or Ni(2-ethylhexanoate)2 and AlEt3: evidence for nanoclusters and sub-nanocluster or larger Ziegler-nanocluster based catalysis.

    William M Alley, Isil K Hamdemir, Qi Wang, Anatoly I Frenkel, Long Li, Judith C Yang, Laurent D Menard, Ralph G Nuzzo, Saim Özkar, Kuang-Hway Yih, Kimberly A Johnson, Richard G Finke

    Langmuir : the ACS journal of surfaces and colloids. 05/2011; 27(10):6279-94.

    Ziegler-type hydrogenation catalysts are important for industrial processes, namely, the large-scale selective hydrogenation of styrenic block copolymers. Ziegler-type hydrogenation catalysts are composed of a group 8-10 transition metal precatalyst plus an alkylaluminum cocatalyst (and they are not... [more] Ziegler-type hydrogenation catalysts are important for industrial processes, namely, the large-scale selective hydrogenation of styrenic block copolymers. Ziegler-type hydrogenation catalysts are composed of a group 8-10 transition metal precatalyst plus an alkylaluminum cocatalyst (and they are not the same as Ziegler-Natta polymerization catalysts). However, for ∼50 years two unsettled issues central to Ziegler-type hydrogenation catalysis are the nature of the metal species present after catalyst synthesis, and whether the species primarily responsible for catalytic hydrogenation activity are homogeneous (e.g., monometallic complexes) or heterogeneous (e.g., Ziegler nanoclusters defined as metal nanoclusters made from combination of Ziegler-type hydrogenation catalyst precursors). A critical review of the existing literature (Alley et al. J. Mol. Catal. A: Chem. 2010, 315, 1-27) and a recently published study using an Ir model system (Alley et al. Inorg. Chem. 2010, 49, 8131-8147) help to guide the present investigation of Ziegler-type hydrogenation catalysts made from the industrially favored precursors Co(neodecanoate)(2) or Ni(2-ethylhexanoate)(2), plus AlEt(3). The approach and methods used herein parallel those used in the study of the Ir model system. Specifically, a combination of Z-contrast scanning transmission electron microscopy (STEM), matrix assisted laser desorption ionization mass spectrometry (MALDI MS), and X-ray absorption fine structure (XAFS) spectroscopy are used to characterize the transition metal species both before and after hydrogenation. Kinetic studies including Hg(0) poisoning experiments are utilized to test which species are the most active catalysts. The main findings are that, both before and after catalytic cyclohexene hydrogenation, the species present comprise a broad distribution of metal cluster sizes from subnanometer to nanometer scale particles, with estimated mean cluster diameters of about 1 nm for both Co and Ni. The XAFS results also imply that the catalyst solutions are a mixture of the metal clusters described above, plus unreduced metal ions. The kinetics-based Hg(0) poisoning evidence suggests that Co and Ni Ziegler nanoclusters (i.e., M(≥4)) are the most active Ziegler-type hydrogenation catalysts in these industrial systems. Overall, the novelty and primary conclusions of this study are as follows: (i) this study examines Co- and Ni-based catalysts made from the actual industrial precursor materials, catalysts that are notoriously problematic regarding their characterization; (ii) the Z-contrast STEM results reported herein represent, to our knowledge, the best microscopic analysis of the industrial Co and Ni Ziegler-type hydrogenation catalysts; (iii) this study is the first explicit application of an established method, using multiple analytical methods and kinetics-based studies, for distinguishing homogeneous from heterogeneous catalysis in these Ziegler-type systems; and (iv) this study parallels the successful study of an Ir model Ziegler catalyst system, thereby benefiting from a comparison to those previously unavailable findings, although the greater M-M bond energy, and tendency to agglomerate, of Ir versus Ni or Co are important differences to be noted. Overall, the main result of this work is that it provides the leading hypothesis going forward to try to refute in future work, namely, that sub, M(≥4) to larger, M(n) Ziegler nanoclusters are the dominant, industrial, Co- and Ni- plus AlR(3) catalysts in Ziegler-type hydrogenation systems.
  • 4.08
    Impact points
    One-pot synthesis of colloidally robust rhodium(0) nanoparticles and their catalytic activity in the dehydrogenation of ammonia-borane for chemical hydrogen storage.

    Tuğçe Ayvalı, Mehmet Zahmakıran, Saim Özkar

    Dalton transactions (Cambridge, England : 2003). 03/2011; 40(14):3584-91.

    Rhodium(0) nanoparticles stabilized by tert-butylammonium octanoate were prepared reproducibly from the reduction of rhodium(II) octanoate with tert-butylamine-borane in toluene at room temperature and characterized by ICP-OES, TEM, HRTEM, STEM, EDX, XRD, XPS, FTIR, UV-vis, (11)B, (13)C and (1)H NMR... [more] Rhodium(0) nanoparticles stabilized by tert-butylammonium octanoate were prepared reproducibly from the reduction of rhodium(II) octanoate with tert-butylamine-borane in toluene at room temperature and characterized by ICP-OES, TEM, HRTEM, STEM, EDX, XRD, XPS, FTIR, UV-vis, (11)B, (13)C and (1)H NMR spectroscopy and elemental analysis. These new rhodium(0) nanoparticles show unprecedented catalytic activity, lifetime and reusability as a heterogeneous catalyst in room temperature dehydrogenation of ammonia-borane, which is under significant investigation as a potential hydrogen storage material.
  • 4.08
    Impact points
    Osmium(0) nanoclusters stabilized by zeolite framework; highly active catalyst in the aerobic oxidation of alcohols under mild conditions.

    Mehmet Zahmakiran, Serdar Akbayrak, Tetsuya Kodaira, Saim Ozkar

    Dalton transactions (Cambridge, England : 2003). 08/2010; 39(32):7521-7.

    Osmium(0) nanoclusters stabilized by zeolite-Y framework were reproducibly prepared by a simple two step procedure involving the incorporation of osmium(III) cations into the zeolite matrix by ion-exchange, followed by their reduction within the cavities of zeolite with sodium borohydride in aqueous... [more] Osmium(0) nanoclusters stabilized by zeolite-Y framework were reproducibly prepared by a simple two step procedure involving the incorporation of osmium(III) cations into the zeolite matrix by ion-exchange, followed by their reduction within the cavities of zeolite with sodium borohydride in aqueous solution all at room temperature. The composition and morphology of osmium(0) nanoclusters stabilized by zeolite framework, as well as the integrity and crystallinity of the host material were investigated by using ICP-OES, XRD, XPS, SEM, TEM, HRTEM, TEM/EDX, mid-IR, far-IR spectroscopies, and N(2)-adsorption/desorption technique. The results of the multiprong analysis reveal the formation of osmium(0) nanoclusters within the cavities of zeolite-Y without causing alteration in the framework lattice, formation of mesopores, or loss in the crystallinity of the host material. More importantly, far-IR studies showed that after the reduction of Os(3+) cations by sodium borohydride the Na(+) cations reoccupy their authentic cation sites restoring the integrity of zeolite-Y. The catalytic activity of osmium(0) nanoclusters stabilized by zeolite framework was tested in the aerobic oxidation of activated, unactivated and heteroatom containing alcohols to carbonyl compounds and was found to provide high activity and selectivity even under mild conditions (80 degrees C and 1 atm O(2) or air). Moreover, they were found to be stable enough to be isolated and bottled as solid material, which can be reused as active catalyst under the identical conditions of the first run.
  • 5.50
    Impact points
    Ruthenium(0) nanoclusters supported on hydroxyapatite: highly active, reusable and green catalyst in the hydrogenation of aromatics under mild conditions with an unprecedented catalytic lifetime.

    Mehmet Zahmakiran, Yalcin Tonbul, Saim Ozkar

    Chemical communications (Cambridge, England). 07/2010; 46(26):4788-90.

    The preparation of ruthenium(0) nanoclusters supported on hydroxyapatite and their characterization by a combination of complementary techniques are described. The resultant ruthenium(0) nanoclusters provide high activity and reusability in the complete hydrogenation of aromatics under mild conditio... [more] The preparation of ruthenium(0) nanoclusters supported on hydroxyapatite and their characterization by a combination of complementary techniques are described. The resultant ruthenium(0) nanoclusters provide high activity and reusability in the complete hydrogenation of aromatics under mild conditions (at 25 degrees C and with 42 psi initial H(2) pressure).
  • 8.58
    Impact points
  • 8.58
    Impact points
    Ruthenium(0) nanoclusters stabilized by a Nanozeolite framework: isolable, reusable, and green catalyst for the hydrogenation of neat aromatics under mild conditions with the unprecedented catalytic activity and lifetime.

    Mehmet Zahmakiran, Yalçin Tonbul, Saim Ozkar

    Journal of the American Chemical Society. 05/2010; 132(18):6541-9.

    The hydrogenation of aromatics is a ubiquitous chemical transformation used in both the petrochemical and specialty industry and is important for the generation of clean diesel fuels. Reported herein is the discovery of a superior heterogeneous catalyst, superior in terms of catalytic activity, sele... [more] The hydrogenation of aromatics is a ubiquitous chemical transformation used in both the petrochemical and specialty industry and is important for the generation of clean diesel fuels. Reported herein is the discovery of a superior heterogeneous catalyst, superior in terms of catalytic activity, selectivity, and lifetime in the hydrogenation of aromatics in the solvent-free system under mild conditions (at 25 degrees C and 42 +/- 1 psig initial H(2) pressure). Ruthenium(0) nanoclusters stabilized by a nanozeolite framework as a new catalytic material is reproducibly prepared from the borohydride reduction of a colloidal solution of ruthenium(III)-exchanged nanozeolites at room temperature and characterized by using ICP-OES, XRD, XPS, DLS, TEM, HRTEM, TEM/EDX, mid-IR, far-IR, and Raman spectroscopy. The resultant ruthenium(0) nanoclusters hydrogenate neat benzene to cyclohexane with 100% conversion under mild conditions (at 25 degrees C and 42 +/- 1 psig initial H(2) pressure) with record catalytic activity (initial TOF = 5430 h(-1)) and lifetime (TTO = 177 200). They provide exceptional catalytic activity not only in the hydrogenation of neat benzene but also in the solvent-free hydrogenation of methyl substituted aromatics such as toluene, o-xylene, and mesitylene under otherwise identical conditions. Moreover, they are an isolable, bottleable, and reusable catalyst in the hydrogenation of neat aromatics. When the isolated ruthenium(0) nanoclusters are reused, they retain 92% of their initial catalytic activity even for the third run in the hydrogenation of neat benzene under the same conditions as those of the first run. The work reported here also includes (i) far-infrared spectroscopic investigation of nanozeolite, ruthenium(III)-exchanged-nanozeolite, and ruthenium(0) nanoclusters stabilized by a nanozeolite framework, indicating that the host framework remains intact after the formation of a nanozeolite framework stabilized ruthenium(0) nanoclusters; (ii) the poisoning experiments performed by using tricyclohexylphosphine (P(C(6)H(11))(3)) and 4-ethyl-2,6,7-trioxa-1-phosphabicyclo[2.2.2]octane PC(6)H(11)O(3) to examine whether the ruthenium(0) nanoclusters are encapsulated in the cages or supported on the external surface of nanozeolite; (iii) a summary section detailing the main findings for the "green chemistry"; and (iv) a review of the extensive literature of benzene hydrogenation, which is also tabulated as part of the Supporting Information .
  • 5.50
    Impact points
    Aminopropyltriethoxysilane stabilized ruthenium(0) nanoclusters as an isolable and reusable heterogeneous catalyst for the dehydrogenation of dimethylamine-borane.

    Mehmet Zahmakiran, Mar Tristany, Karine Philippot, Katia Fajerwerg, Saim Ozkar, Bruno Chaudret

    Chemical communications (Cambridge, England). 05/2010; 46(17):2938-40.

    The preparation of Ru(0) nanoclusters stabilized by 3-aminopropyltriethoxysilane and their characterization by a combination of complementary techniques are described. These new Ru(0) nanoclusters provide high activity and unprecedented reusability as a heterogeneous catalyst in the dehydrogenation ... [more] The preparation of Ru(0) nanoclusters stabilized by 3-aminopropyltriethoxysilane and their characterization by a combination of complementary techniques are described. These new Ru(0) nanoclusters provide high activity and unprecedented reusability as a heterogeneous catalyst in the dehydrogenation of dimethylamine-borane.
  • 4.66
    Impact points
    Dimethylammonium Hexanoate Stabilized Rhodium(0) Nanoclusters Identified as True Heterogeneous Catalysts with the Highest Observed Activity in the Dehydrogenation of Dimethylamine-Borane.

    Mehmet Zahmakiran, Saim Özkar

    Inorganic chemistry. 08/2009;

    Herein we report the discovery of a superior dimethylamine-borane dehydrogenation catalyst, more active than the prior best heterogeneous catalyst (Jaska, C. A.; Manners, I. J. Am. Chem. Soc. 2004, 126, 9776) reported to date for the dehydrogenation of dimethylamine-borane. The new catalyst system c... [more] Herein we report the discovery of a superior dimethylamine-borane dehydrogenation catalyst, more active than the prior best heterogeneous catalyst (Jaska, C. A.; Manners, I. J. Am. Chem. Soc. 2004, 126, 9776) reported to date for the dehydrogenation of dimethylamine-borane. The new catalyst system consists of rhodium(0) nanoclusters stabilized by C(5)H(11)COO(-) anions and Me(2)H(2)N(+) cations and can reproducibly be formed from the reduction of rhodium(II) hexanoate during dehydrogenation of dimethylamine-borane at room temperature. Rhodium(0) nanoclusters in an average particle size of 1.9 +/- 0.6 nm Rh(0)( approximately 190) nanoclusters) provide 1040 turnovers over 26 h with a record initial turnover frequency (TOF) of 60 h(-1) (the average TOF value is 40 h(-1)) in the dehydrogenation of dimethylamine-borane, yielding 100% of the cyclic product (Me(2)NBH(2))(2) at room temperature. The work reported here also includes the full experimental details of the following major components: (i) Characterization of dimethylammonium hexanoate stabilized rhodium(0) nanoclusters by using TEM, STEM, EDX, XRD, UV-vis, XPS, FTIR, (1)H, (13)C, and (11)B NMR spectroscopy, and elemental analysis. (ii) Collection of a wealth of previously unavailable kinetic data to determine the rate law and activation parameters for catalytic dehydrogenation of dimethylamine-borane. (iii) Monitoring of the formation kinetics of the rhodium(0) nanoclusters by a fast dimethylamine-borane dehydrogenation catalytic reporter reaction (Watzky, M. A.; Finke, R. G. J. Am. Chem. Soc. 1997, 119, 10382) at various [Me(2)NH.BH(3)]/[Rh] ratios and temperatures. Significantly, sigmoidal kinetics of catalyst formation was found to be well fit to the two-step, slow nucleation and then autocatalytic surface growth mechanism, A --> B (rate constant k(1)) and A + B --> 2B (rate constant k(2)), in which A is [Rh(C(5)H(11)CO(2))(2)](2) and B is the growing, catalytically active rhodium(0) nanoclusters. (iv) Mercury(0) and CS(2) poisoning and nanofiltration experiments to determine whether the dehydrogenation of dimethylamine-borane catalyzed by the dimethylammonium hexanoate stabilized rhodium(0) nanoclusters is homogeneous or heterogeneous catalysis.
  • 3.90
    Impact points
    Zeolite-confined ruthenium(0) nanoclusters catalyst: record catalytic activity, reusability, and lifetime in hydrogen generation from the hydrolysis of sodium borohydride.

    Mehmet Zahmakiran, Saim Ozkar

    Langmuir : the ACS journal of surfaces and colloids. 04/2009; 25(5):2667-78.

    Sodium borohydride, NaBH4, has been considered the most attractive hydrogen-storage material for portable fuel cell applications, as it provides a safe and practical means of producing hydrogen. In a recent communication (Zahmakiran, M.; Ozkar, S. Langmuir 2008, 24, 7065), we have reported a record ... [more] Sodium borohydride, NaBH4, has been considered the most attractive hydrogen-storage material for portable fuel cell applications, as it provides a safe and practical means of producing hydrogen. In a recent communication (Zahmakiran, M.; Ozkar, S. Langmuir 2008, 24, 7065), we have reported a record total turnover number (TTON) of 103 200 mol H2/mol Ru and turnover frequency (TOF) up to 33 000 mol H2/mol Ru x h obtained by using intrazeolite ruthenium(0) nanoclusters in the hydrolysis of sodium borohydride. Here we report full details of the kinetic studies on the intrazeolite ruthenium(0) nanoclusters catalyzed hydrolysis of sodium borohydride in both aqueous and basic solutions. Expectedly, the intrazeolite ruthenium(0) nanoclusters show unprecedented catalytic lifetime, TTON = 27 200 mol H2/mol Ru, and TOF up to 4000 mol H2/mol Ru x h in the hydrolysis of sodium borohydride in basic solution (5% wt NaOH) as well. More importantly, the intrazeolite ruthenium(0) nanoclusters are isolable, bottleable, redispersible, and yet catalytically active. They retain 76% or 61% of their initial catalytic activity at the fifth run with a complete release of hydrogen in aqueous and basic medium, respectively. The intrazeolite ruthenium(0) nanoclusters were isolated as black powder and characterized by using a combination of advanced analytical techniques including XRD, HRTEM, TEM-EDX, SEM, XPS, ICP-OES, and N2 adsorption.
  • 3.90
    Impact points
    Zeolite-Confined Ruthenium(0) Nanoclusters Catalyst: Record Catalytic Activity, Reusability, and Lifetime in Hydrogen Generation from the Hydrolysis of Sodium Borohydride.

    Mehmet Zahmakiran, Saim Özkar

    Langmuir : the ACS journal of surfaces and colloids. 03/2009;

    Sodium borohydride, NaBH(4), has been considered the most attractive hydrogen-storage material for portable fuel cell applications, as it provides a safe and practical means of producing hydrogen. In a recent communication ( Zahmakiran, M.; Ozkar, S. Langmuir 2008, 24, 7065 ), we have reported a rec... [more] Sodium borohydride, NaBH(4), has been considered the most attractive hydrogen-storage material for portable fuel cell applications, as it provides a safe and practical means of producing hydrogen. In a recent communication ( Zahmakiran, M.; Ozkar, S. Langmuir 2008, 24, 7065 ), we have reported a record total turnover number (TTON) of 103 200 mol H(2)/mol Ru and turnover frequency (TOF) up to 33 000 mol H(2)/mol Ru.h obtained by using intrazeolite ruthenium(0) nanoclusters in the hydrolysis of sodium borohydride. Here we report full details of the kinetic studies on the intrazeolite ruthenium(0) nanoclusters catalyzed hydrolysis of sodium borohydride in both aqueous and basic solutions. Expectedly, the intrazeolite ruthenium(0) nanoclusters show unprecedented catalytic lifetime, TTON = 27 200 mol H(2)/mol Ru, and TOF up to 4000 mol H(2)/mol Ru.h in the hydrolysis of sodium borohydride in basic solution (5% wt NaOH) as well. More importantly, the intrazeolite ruthenium(0) nanoclusters are isolable, bottleable, redispersible, and yet catalytically active. They retain 76% or 61% of their initial catalytic activity at the fifth run with a complete release of hydrogen in aqueous and basic medium, respectively. The intrazeolite ruthenium(0) nanoclusters were isolated as black powder and characterized by using a combination of advanced analytical techniques including XRD, HRTEM, TEM-EDX, SEM, XPS, ICP-OES, and N(2) adsorption.
  • 4.66
    Impact points
    Model Ziegler-Type Hydrogenation Catalyst Precursors, [(1,5-COD)M(mu-O(2)C(8)H(15))](2) (M = Ir and Rh): Synthesis, Characterization, and Demonstration of Catalytic Activity En Route to Identifying the True Industrial Hydrogenation Catalysts.

    William M Alley, Chase W Girard, Saim Özkar, Richard G Finke

    Inorganic chemistry. 02/2009;

    The compounds [(1,5-COD)M(mu-O(2)C(8)H(15))](2) (COD = cyclooctadiene, M = Ir (1) or Rh (2), O(2)C(8)H(15) = 2-ethylhexanoate) were synthesized by addition of Bu(3)NH(2-ethylhexanoate) or Na(2-ethylhexanoate) to acetone suspensions of [(1,5-COD)Ir(mu-Cl)](2) or [(1,5-COD)Rh(mu-Cl)](2), respectively.... [more] The compounds [(1,5-COD)M(mu-O(2)C(8)H(15))](2) (COD = cyclooctadiene, M = Ir (1) or Rh (2), O(2)C(8)H(15) = 2-ethylhexanoate) were synthesized by addition of Bu(3)NH(2-ethylhexanoate) or Na(2-ethylhexanoate) to acetone suspensions of [(1,5-COD)Ir(mu-Cl)](2) or [(1,5-COD)Rh(mu-Cl)](2), respectively. The synthesis of such well-defined second and third row model precursors is key to determining the true nature of commercial Ziegler-type hydrogenation catalysts (i.e., catalysts made from the combination of a non-zerovalent, group 8-10 transition metal precatalyst and a trialkylaluminum cocatalyst), an unsolved, approximately 40 year old problem. The characterizations of 1 and 2 were accomplished by elemental analysis, melting point, FAB-MS, FT-IR, UV-vis, NMR spectroscopy, and single crystal X-ray diffraction. The complexes, C(32)H(54)Ir(2)O(4) and C(32)H(54)O(4)Rh(2), are isostructural: monoclinic, P2(1)/n, Z = 4. The lattice constants for 1 are a = 15.7748(5) A, b = 9.8962(3) A, c = 20.8847(7) A, beta = 108.408(2) degrees . The lattice constants for 2 are a = 15.7608(4) A, b = 9.9032(3) A, c = 20.8259(5) A, beta = 108.527(1) degrees . Complexes 1 and 2 are dimeric, bridged by the 2-ethylhexanoates, and with one 1,5-COD ligand bound to each metal. The formally 16 electron metal atoms are in square ligand planes with dihedral angles between the planes of 56.5 degrees for 1 and 58.1 degrees for 2. The M-M distances of 3.2776(2) and 3.3390(4) A for 1 and 2, respectively, fall in the range of similar structures thought to have some M-M interaction despite the lack of a formal M-M bond. Demonstration that active Ziegler-type hydrogenation catalysts are made when 1 or 2 combine with AlEt(3) is provided, results that open the door to the use of 1 and 2 as well-defined third and second row congeners, respectively, of Ziegler-type hydrogenation catalysts. These compounds have proven important in addressing the previously unsolved problem of the true nature of the catalyst in industrial Ziegler-type hydrogenation catalyst systems; their high yield synthesis and unequivocal characterization reported herein are the necessary first steps of that work.
  • 3.90
    Impact points
    Intrazeolite ruthenium(0) nanoclusters: a superb catalyst for the hydrogenation of benzene and the hydrolysis of sodium borohydride.

    Mehmet Zahmakiran, Saim Ozkar

    Langmuir : the ACS journal of surfaces and colloids. 08/2008; 24(14):7065-7.

    The use of microporous materials with ordered porous structures as the hosts to encapsulate metal nanoclusters has attracted particular interest in catalysis because the pore size restriction could limit the growth of nanoclusters and lead to an increase in the percentage of the catalytically active... [more] The use of microporous materials with ordered porous structures as the hosts to encapsulate metal nanoclusters has attracted particular interest in catalysis because the pore size restriction could limit the growth of nanoclusters and lead to an increase in the percentage of the catalytically active surface atoms. This letter reports the preparation of ruthenium(0) nanoclusters stabilized by the framework of Zeolite-Y by using a simple, easy, efficient method and their superb catalytic activities in two important reactions: the hydrogenation of arenes (benzene, toluene, o-xylene, mesitylene) and the hydrolysis of sodium borohydride, all at room temperature. Particularly, the intrazeolite ruthenium(0) nanoclusters exhibit unprecedented catalytic activity in the hydrogenation of neat benzene at 22.0 +/- 0.1 degrees C and 40 +/- 1 psig H2 with a record TOF of 1040 mol benzene/mol Ru . h.
  • Water soluble laurate-stabilized ruthenium(0) nanoclusters catalyst for hydrogen generation from the hydrolysis of ammonia-borane: High activity and long lifetime

    Feyyaz Durap, Mehmet Zahmakıran, Saim Özkar

    International Journal of Hydrogen Energy.

    The simplest amine-borane, considered as solid hydrogen storage material, ammonia-borane (H3NBH3) can release hydrogen gas upon catalytic hydrolysis under mild conditions. Herein, we report the preparation of a novel catalyst, water dispersible laurate-stabilized ruthenium(0) nanoclusters from the d... [more] The simplest amine-borane, considered as solid hydrogen storage material, ammonia-borane (H3NBH3) can release hydrogen gas upon catalytic hydrolysis under mild conditions. Herein, we report the preparation of a novel catalyst, water dispersible laurate-stabilized ruthenium(0) nanoclusters from the dimethylamine-borane reduction of ruthenium(III) chloride in sodium laurate solution at room temperature. The ruthenium nanoclusters in average size of 2.6 ± 1.2 nm were isolated from the solution and well characterized by using TEM, XPS, FTIR, and UV–visible electronic absorption spectroscopy. The water dispersible laurate-stabilized ruthenium(0) nanoclusters were found to be highly active and long-live catalyst with a TOF of 75 mol H2/mol Ru·min and TTO value of 5900 mol H2/mol Ru in the hydrolysis of ammonia-borane at 25.0 ± 0.1 °C.
  • Zeolite confined copper(0) nanoclusters as cost-effective and reusable catalyst in hydrogen generation from the hydrolysis of ammonia-borane

    Mehmet Zahmakıran, Feyyaz Durap, Saim Özkar

    International Journal of Hydrogen Energy.

    Herein we report the development of a cost-effective nanocluster catalyst for the hydrolytic dehydrogenation of ammonia-borane which is considered to be one among the new hydrogen storage materials. Zeolite confined copper(0) nanoclusters were prepared by the ion-exchange of Cu2+ ions with the extra... [more] Herein we report the development of a cost-effective nanocluster catalyst for the hydrolytic dehydrogenation of ammonia-borane which is considered to be one among the new hydrogen storage materials. Zeolite confined copper(0) nanoclusters were prepared by the ion-exchange of Cu2+ ions with the extra framework Na+ ions in zeolite-Y followed by reduction of the Cu2+ ions within the cavities of zeolite with sodium borohydride in aqueous solution and characterized by HR-TEM, XRD, XPS, SEM, EDX, ICP-OES, Raman spectroscopy and N2 adsorption–desorption technique. Zeolite confined copper(0) nanoclusters are found to be active catalysts in the hydrolysis of ammonia-borane even at low temperatures (≤15 °C) and stable enough for being isolated as solid materials. They provide 1300 turnovers in hydrogen generation from the hydrolysis of ammonia–borane at room temperature. The average value of turnover frequency is 46.5 h−1 for the same reaction. More importantly, zeolite confined copper(0) nanoclusters were found to be isolable, bottleable and reusable catalysts in the hydrolytic dehydrogenation of ammonia-borane; even at fifth run the complete release of hydrogen from the hydrolysis of ammonia-borane at room temperature is achieved. The work reported here also includes the full experimental details for the collection of a wealth of kinetic data to determine the activation energy and the effect of catalyst concentration on the rate for the catalytic hydrolysis of ammonia–borane.

Following (23)

22
Publications
21
Followers