Publications (43) View all
-
Article: Layered double hydroxide induced advancement in joint prosthesis using bone cement: the effect of metal substitution
[show abstract] [hide abstract]
ABSTRACT: Poly(methyl methacrylate) based bone cement and its nanocomposites with layered double hydroxide (LDH) have been developed with greater mechanical strength and biocompatibility as a grouting material for total joint arthroplasty. Bivalent magnesium has been replaced with trivalent aluminium with various mole ratios, keeping the layered pattern of the LDH intact, to cater for the effect of varying substitution on the property enhancement of the nanocomposites. The intercalation of polymer inside the LDH layers makes them disordered and mechanically stiffer and tougher by more than 100%. The thermal stability of bone cement has increased by more than 30 °C in the presence of 1 wt% of nanoLDH, homogenously distributed in the bone cement matrix by creating an inorganic thermal barrier out of the LDH dispersion. The improvement in the properties of the nanocomposites has been explained in terms of the strong interaction between nanoLDH and polymer. The superior bioactivity and biocompatibility of the nanocomposites, as compared to pure bone cement, has been established through hemolysis assay, cell adhesion, MTT assay and cell proliferation using fluorescence imaging. The developed nanocomposites have been used as a grouting material and significant improvements have been achieved in fatigue behaviour with gradual increment of Al substitution in the Mg:Al mole ratio in nanoLDH, demonstrating the real use of the material in the biomedical area. In vivo experiments on rabbits clearly revealed the superior efficacy of bone cement nanocomposites, over pure bone cement and a blank.Journal of Materials Chemistry 01/2013; · 5.97 Impact Factor -
Article: Biodegradable Polyester/Layered Silicate Nanocomposites
[show abstract] [hide abstract]
ABSTRACT: Nanocomposites of alpha-hydroxy polyester, polylactide (PLA) and Beta-hydroxy polyester, polyhydroxybutyrate (PHB) with layered silicates have been successfully prepared by melt extrusion of PLA and PHB with organically modified montmorillonite (MMT) and fluoromica. The mechanical properties of the nanocomposites are improved compared to the neat polymers. Storage modulus increase up to 40% compared with the pure polymers by adding only 2-3 wt% nanoclay. Biodegradation can be controlled by the choice of the nanoclay used.11/2012; -
Article: Polycaprolactone composites with TiO2 for potential nanobiomaterials: tunable properties using different phases.
[show abstract] [hide abstract]
ABSTRACT: TiO(2) nanoparticles of different phases play a key role in property alteration of nanocomposite fibers. Polycaprolactone (PCL)/TiO(2) composite fibers were prepared using the electrospinning method. Pure anatase and rutile phases were synthesized using the sol-gel route for nanocomposite synthesis. The Effect of nanoparticle phases on crystallinity of fibers and interaction with polymer molecules have been studied using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, morphology through SEM, surface properties using BET method and wetting property of fibers commencing from contact angle measurement. Biocompatibility and biodegradation of hybrid materials have been studied in simulated body fluid (SBF) and phosphate buffer (PBS), respectively. The anatase phase with smaller particle dimensions exhibited significant improvement of most of the properties as compared to composites made of the rutile phase. Better interaction between polymer chain and anatase particle PCL-A nanocomposite fibers leads to better mechanical property and biocompatibility vis-à-vis PCL-R and pristine PCL fibers. Biocompatibility of PCL nanocomposite has been testified through proliferation of fibroblast cell and its adhesion; MTT (3-(4,5-dimethythiazol-2-yl)-2,5-diphenyl tetrazolium bromide) assay demonstrates good proliferation rate for cells on PCL-A nanocomposite fibres.Physical Chemistry Chemical Physics 08/2012; 14(37):12844-53. · 3.57 Impact Factor -
Article: Bone cement/layered double hydroxide nanocomposites as potential biomaterials for joint implant.
[show abstract] [hide abstract]
ABSTRACT: Poly(methyl methacrylate)-based bone cement and layered double hydroxide (LDH) nanocomposites have been used as a grouting material for total joint arthroplasty. Few weight percentage of nanoLDH was uniformly dispersed in the bone cement matrix to have adequate interaction with matrix polymer. Mechanical strength, stiffness, toughness, and fatigue resistance of the nanocomposites are found to be higher than that of pure bone cement. Nanocomposites are thermally stable as compared to pristine bone cement. Direct mixing of the nanoLDH without any organic solvent makes these nanocomposites biocompatible. Biocompatibility was evaluated and compared with that of commercial bone cement by measuring hydrophilic nature, hemolysis assay, thrombosis assay, and deposition of apatite in simulated body fluid immersion. Finally, the viability of human osteoblast cells on the above developed nanocomposites was testified for actual biocompatibility. The experiment showed better cell growth in nanocomposites as compared to pure bone cement. Thus, these nanocomposites are found to be better grouting material than bone cement. © 2012 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 100A:3363-3373, 2012.Journal of Biomedical Materials Research Part A 06/2012; 100(12):3363-73. · 2.63 Impact Factor -
Article: Nanoparticle induced piezoelectric, super toughened, radiation resistant, multi-functional nanohybrids.
[show abstract] [hide abstract]
ABSTRACT: We have developed multifunctional nanohybrids of poly(vinylidene fluoride-co-chlorotrifluoroethylene) (CTFE) with a small percentage of surface modified inorganic layered silicate showing dramatic improvement in toughness, radiation resistant and piezoelectric properties vis-à-vis pristine polymer. Massive intercalation (d(001) 1.8 → 3.9 nm) of polymer inside the nanoclay galleries and unique crystallization behavior of the fluoropolymer on the surface of individual silicate layer has been reported. Toughness in the nanohybrid increases more than three orders of magnitude as compared to pure CTFE. High energy radiation (80 MeV Si(+7)) causes chain session, amorphization and creates olefinic bonds in the pure polymer while the nanohybrids are radiation resistant at a similar dose. Nanoclay induces the metastable piezoelectric β-phase in CTFE, suitable for sensor and actuator application. Molecular level changes after irradiation and controlled morphology for smart membrane have been confirmed by using spectroscopy, sol-gel technique, surface morphology studies and in situ residual gas analysis.Nanoscale 11/2011; 4(1):167-75. · 5.91 Impact Factor
