Publications (150) View all
-
Article: Sensing small neurotransmitter-enzyme interaction with nanoporous gated ion-sensitive field effect transistors.
[show abstract] [hide abstract]
ABSTRACT: Ion-sensitive field effect transistors with gates having a high density of nanopores were fabricated and employed to sense the neurotransmitter dopamine with high selectivity and detectability at micromolar range. The nanoporous structure of the gates was produced by applying a relatively simple anodizing process, which yielded a porous alumina layer with pores exhibiting a mean diameter ranging from 20 to 35 nm. Gate-source voltages of the transistors demonstrated a pH-dependence that was linear over a wide range and could be understood as changes in surface charges during protonation and deprotonation. The large surface area provided by the pores allowed the physical immobilization of tyrosinase, which is an enzyme that oxidizes dopamine, on the gates of the transistors, and thus, changes the acid-base behavior on their surfaces. Concentration-dependent dopamine interacting with immobilized tyrosinase showed a linear dependence into a physiological range of interest for dopamine concentration in the changes of gate-source voltages. In comparison with previous approaches, a response time relatively fast for detecting dopamine was obtained. Additionally, selectivity assays for other neurotransmitters that are abundantly found in the brain were examined. These results demonstrate that the nanoporous structure of ion-sensitive field effect transistors can easily be used to immobilize specific enzyme that can readily and selectively detect small neurotransmitter molecule based on its acid-base interaction with the receptor. Therefore, it could serve as a technology platform for molecular studies of neurotransmitter-enzyme binding and drugs screening.Biosensors & bioelectronics 01/2012; 31(1):157-63. · 5.43 Impact Factor -
Article: Influence of microwave heating on fluoride, chloride, nitrate and sulfate concentrations in water.
[show abstract] [hide abstract]
ABSTRACT: This paper describes a study about the influence of microwave radiation using closed vessels on fluoride, chloride, nitrate and sulfate concentrations in aqueous media. The experiments were processed by heating water using PFA vessels and a microwave cavity oven, determining the anions by ion chromatography. The influence of the exposure time, the atmospheric composition, the kind of heating (water bath or microwave radiation) and the possible formation of hydrogen peroxide were investigated. The limits of quantification for fluoride, chloride, nitrate and sulfate were respectively of 0.17, 0.15, 0.55 and 0.57 μg L(-1), and precision, expressed as RSD, was <4% for all considered anions. The hydrogen peroxide was quantified by spectrophotometry, and the limit of quantification and precision were 24 μg L(-1) and <5% (n=10), respectively. The results demonstrate a significant increase in the anion concentration levels (between 63 and 89%) when microwave heating was used in comparison with heating by water bath. In addition, these changes observed can be mainly attributed to the species transfers, either between gaseous (atmospheric gases) and liquid (water) phases for nitrate, or between vessels walls and water for fluoride, chloride and sulfate. Additionally, hydrogen peroxide concentration higher than 45 μg L(-1) was determined when water was exposed to microwave radiation.Talanta 10/2011; 85(5):2707-10. · 3.79 Impact Factor -
Article: Novel electrochemical sensor for the selective recognition of chlorogenic acid.
[show abstract] [hide abstract]
ABSTRACT: In this study, a novel sensitive molecularly imprinted electrochemical sensor was constructed for the selective detection of chlorogenic acid (CGA) by deposition of a molecularly imprinted siloxane (MIS) film, prepared by sol-gel process, onto Au bare electrode surface. Initially, a (3-mercaptopropyl)siloxane layer (MSL) was formed on the Au bare surface, followed by a siloxane layer obtained from the acid-catalyzed hydrolysis/condensation of a solution constituted by tetraethoxysilane (TEOS), phenyltriethoxysilane (PTEOS), 3-(aminopropyl)trimethoxysilane (APTMS) and CGA, as a molecular template. After the GCA extraction the MIS imprinted film was electrochemically characterized using differential pulse voltammetry (DPV). The MIS/Au sensor was tested in a solution of the CGA template and other similar molecules. This electrode displayed excellent selectivity towards CGA when compared with structurally similar molecules. Under optimized experimental conditions, the peak current response of the sensor for CGA was linear from 5.0 × 10(-7)mol L(-1) to 1.4 × 10(-5)mol L(-1), and the detection limit was 1.48 × 10(-7)mol L(-1). The MIS/Au sensor was successfully applied for the determination of CGA in coffee and tea samples.Analytica chimica acta 06/2011; 695(1-2):44-50. · 4.31 Impact Factor -
Article: The potential and application of microfluidic paper-based separation devices.
Bioanalysis 10/2010; 2(10):1663-5. · 3.22 Impact Factor -
Article: A Poly(Vinyl Chloride) Membrane Electrode for the Determination of the Diuretic Furosemide
Analytical Letters 08/2010; 2004(Vol. 37):35-46. · 1.02 Impact Factor
